CALCULATION OF EFFECTIVE NEUTRON MULTIPLICATION FACTOR FOR SOME MINOR ACTINIDES IN A BOILING WATER REACTOR


Abstract views: 79 / PDF downloads: 40

Authors

  • Mehtap DÜZ İnönü University, Science and Art Faculty, Physics Department

DOI:

https://doi.org/10.38065/euroasiaorg.210

Keywords:

Boiling Water Reactor, keff, MCNPX-2.7.0

Abstract

In this study, using the Monte Carlo method fission reacting a boiling water reactor (BWR) was designed. The designed BWR system is divided into a square lattice of 8x8 type. Each square lattice is divided into 7x7 type small square lattice. Fuel cell in small square lattice was created from fuel rod, gap, clad zones. AmO2 and AmF3 minor actinides at 0.085-0.095% ratio in the fuel rod and Zr-2 in the clad region were used. In this study, the effect of the minor actinides used on the effective neutron multiplication factor (keff) was investigated. Three-dimensional analyses were performed by using the Monte Carlo code MCNPX-2.7.0 and ENDF/B-VII.0 evaluated nuclear data library.

Published

2020-07-31

How to Cite

DÜZ, M. (2020). CALCULATION OF EFFECTIVE NEUTRON MULTIPLICATION FACTOR FOR SOME MINOR ACTINIDES IN A BOILING WATER REACTOR. Euroasia Journal of Mathematics, Engineering, Natural & Medical Sciences, 7(10), 43–46. https://doi.org/10.38065/euroasiaorg.210

Issue

Section

Articles