INVESTIGATION OF THE EFFECTS OF THE CUTTING PARAMETERS AND COOLANT ON THE SURFACE ROUGHNESS VALUE IN THE MACHINING OF AISI 4340 WITH CBN TOOLS


Özet Görüntüleme: 37 / PDF İndirme: 24

Yazarlar

  • Abidin SAHINOGLU Çankırı Karatekin University
  • Mehmet AKKAS Kastamonu University
  • Mehmet Ali DONERTAS Çankırı Karatekin University

Anahtar Kelimeler:

AISI 4340, hard turning, CBN, surface roughness

Özet

With the heat treatment applied to the workpiece, the material gains are abrasion resistance, friction resistance, thermal resistance and strength. However, hardening of the material makes to machining is difficult. Advances in machine tool and CBN insert technology have facilitated the machining of hard materials. Since CBN tools also prevent the increase of temperature, the use of coolant is not required. In addition, achieving a grinding quality surface makes it possible to use hard turning as an alternative to grinding. In this experimental study, AISI 4340 material with CBN tooling experiments which were increased to 63 HRC hardness by heat treatment were applied. Cutting is done under cooling and dry cutting conditions. Machining experiments were carried out at 3 different cutting speeds and 3 different feed rate at constant depth of cut. It was observed that surface roughness value increased with increasing feed rate. It was observed that dry cutting conditions decreased the surface roughness value in a small amount.

İndir

Yayınlanmış

16.12.2019

Nasıl Atıf Yapılır

SAHINOGLU, A., AKKAS, M., & DONERTAS, M. A. (2019). INVESTIGATION OF THE EFFECTS OF THE CUTTING PARAMETERS AND COOLANT ON THE SURFACE ROUGHNESS VALUE IN THE MACHINING OF AISI 4340 WITH CBN TOOLS. Euroasia Journal of Mathematics, Engineering, Natural & Medical Sciences, 6(7), 1–128. Geliş tarihi gönderen https://euroasiajournal.org/index.php/ejas/article/view/8

Sayı

Bölüm

Makaleler